Basics Of Roof Repair In Dallas

by | Mar 16, 2012 | Construction and Maintenance

It is important to know the basics for roof repair in Dallas to make an informed decision about when to call for a roofing contractor and what repairs can be done by the homeowners. Most of the homes today use asphalt shingles and the roofing material and even though they are durable and rugged, they can develop problems over time. Some of the issues regarding curled shingles can easily be repaired or the damaged shingles can be easily replaced.

Common Issues That Require Roof Repair In Dallas

If you have noticed water stains in a ceiling, the most probable cause is a leaky roof. Check if the shingles on the roof are curled, cracked, loose or missing. Leaks can occur at any point but most vulnerable are the points where shingles meet or where flashing and caulking have been compromised. End caps can also be the source of leaks. End caps are the triangular, tent shaped shingles covering the angular peaks. Instead of climbing on the roof, use a pair of binoculars to inspect and detect the problem areas before calling for roof repair in Dallas.

Repair Or Replace A Shingle For Roof Repair In Dallas

If you have curled back shingles on the roof, they need to be re-secured. You will need roofing cement or equivalent compound and a caulk gun. Apply a good quantity of roofing cement to the underside of the shingle and press it gently for the edges and corners to get secured. Warm weather is more conducive to such repairs as the shingles are more pliable. Always contact a professional for all roof repair in Dallas.

Cracked, missing or rotten shingles require replacements. Make sure that you have the replacement pieces/ shingles available. Lift the edges of the neighboring shingles to remove the damaged shingle and remove the nails with a pry bar. Slide out the damaged shingle carefully. Scrape and clean the area of any residue cement, protruding nails or any other debris. Use a utility knife to round the back corners of the new shingle to ease the sliding in. Once the shingle is aligned in its place, lift the corners of the surrounding shingles and use galvanized roofing nails to secure the shingle. Cover the head of the nails with the roofing cement.
If the leaks are due to metal flashing then the joints need to be resealed with a caulk gun. You can also use a putty knife to apply another coat of the cement on a previous application.

While it may be tempting to do some roof repair in Dallas on your own, it is always better to get a professional assessment from a reputable inspector or roofing contractor in your area.

 

For multiple roofing services get in touch with Roof Time Contractors that offers roofing repair in Dallas along with roofing inspection and maintenance.

Latest Articles

Categories

Archives