Marble is naturally porous, so it’s important to protect it with a quality sealant to prevent staining and discoloration. Currently, there are two types of sealers on the market that work well for marble surfaces. Topical sealers are the most common and work by applying a layer of wax and acrylic to protect the stone. However, topical sealers will need reapplied periodically and aren’t recommended for outdoor use. Alternately, you can protect your marble with a process called impregnation. With this sealant, a solvent-based solutionyour-homes-flooring-how-to-clean-and-care-for-marble-tiles-in-new-canaan-ct actually penetrates the stone to protect it from the inside out. This process typically lasts longer and requires less maintenance.
Make Sure to Seal
Marble tile flooring can give a home a classic elegance that few other materials can offer, but many homeowners in New Canaan are hesitant to install marble tiles because they’re afraid they’ll be too difficult and time-consuming to maintain. Not true! With a little knowledge and preparation, Marble Tiles in New Canaan CT are very simple to protect, clean and maintain. Here’s how to take care of your marble tile flooring so that it will look beautiful for years to come.
Clean it Right
The day-to-day cleaning requirements for Marble Tiles New Canaan CT are actually quite simple. Marble only needs a frequent quick dust mopping and a more infrequent cleaning with detergent and water to stay looking its best. Because water can cause staining or damage to marble, it’s important to dry your floors thoroughly after they’ve been cleaned or after a spill. Also, never use acidic or abrasive cleaning products on marble–they can easily damage the stone.
Remove Stains
Even with the proper sealant, it’s possible for marble tile to become stained over time. According to the Marble Institute of America, it’s important to remove stains the right way to prevent permanent damage. For example, oil-based stains should be cleaned with a mild detergent or ammonia, while organic or food stains should be cleaned with a solution of 12% hydrogen peroxide and a few drops of ammonia. For ink stains, bleach or acetone should be used depending on the color of the marble. Water stains should simply be buffed dry with a 0000 steel wool pad.
