Every year before the weather begins to heat up too much, it can be a good time for a homeowner to have their cooling system inspected and maintained by a company who handles AC Repair in Lubbock. This is important because most cooling systems are designed to last for at least 20 years. However, to accomplish this, the unit must be well maintained and any repairs handled as quickly as possible.
One of the most important things a technician who handles AC Repair in Lubbock will want to do is to clean the unit. Most units tend to collect a lot of dirt and other matter. This can clog the system and cause it to run too hard, which will result in the unit using extra energy. This can cause the unit to wear out sooner and it may result in higher energy usage as well. By cleaning the system regularly these issues can be avoided.
Most cooling systems are comprised of two units. One unit is outside of the home and the other is inside. The unit found in the house is generally the blower and the evaporator. The blower will often be used by the heating system as well. This unit will need to be vacuumed inside and out. This will remove any dirt or debris collected around it. The filter on this unit should also be checked. The repair person from a company who handles AC Repair in Lubbock will replace the filter if necessary. The evaporator is generally near the blower and it will be vacuumed cleaned as well.
The unit outside is generally found near the house on a slab of concrete. This unit contains the condenser and the compressor of the system. The first thing a repairperson from a company who handles AC Repair in Lubbock will want to do is to clean the trash, leaves and other debris accumulated around the unit. Once this is done, the housing can be removed. Coils surround the unit and they must be kept clean so air can flow properly through them. To clean dirt and other matter from the coils a hose with a high-pressure nozzle will be used. If any areas are especially dirty, a coil cleaner may be used as well. The fins on the unit will need to be cleaned using a soft brush.