Regularly Inspect Lifting Clamps for Damage or Wear

Regularly Inspect Lifting Clamps for Damage or Wear

Lifting clamps in PA come in many shapes and sizes, and they are used for a range of industrial applications and purposes. Keeping your clamps in good repair is vital, because they are typically used in areas where safety is absolutely essential to keep workers safe from harm. Some clamps last longer than others, but there are many factors that can contribute to the longevity of your clamp. How often the clamp is used, how much weight it is continuously holding, and the type of material that you are lifting can all play a part in how long your lifting clamps hold up. To keep your clamps in good condition, you must perform regular maintenance checks to look for signs of damage or wear.

Lifting Clamp Inspections

When you are performing inspections on your lifting clamps, you should always check the chain links. If the metal rings are loose or if they are starting to split then you need to replace the chain. Some metal clamps come with chains that are welded on, so if your chain begins to show signs of wear, then you will have to replace the whole thing. If your clamp has a snap-lock casing so that the chain won’t slip while it is being used, then you will need to ensure that the snap-lock is well lubricated. If it isn’t lubricated, then it can be become damaged very quickly. Whether your clamps are curved to support horizontal lifts, or they are fitted to lift heavy objects such as huge concrete blocks, you will need to inspect them regularly so that nobody gets hurt while they are on the job.

Is Your Clamp The Right One For Your Intended Usage?

When checking your clamps, the first thing you should check for is rust. If your clamps come into contact with water on a regular basis, then they may be prone to rusting. If this happens on a regular basis, then you may want to consider a clamp that is made for tough weather conditions. Rust can affect the grip of the clamp, as well as the functionality. You should also look for corrosion. If your clamps come into contact with corrosive chemicals, then make sure your clamps are reinforced or corrosion resistant. Having a clamp made out of soft metal when you handle corrosive chemicals is a bad idea, and one that should be avoided. Get in touch with Bilco Group for more information!

Be the first to like.

Share
    Shares