There is never a good time for your appliances to fail and with cold weather setting in, winter is the worst time to hang on to an old furnace or central heating system. Over the years there are several ways your heating system can wear down and stop working. For instance, electric furnaces heat the air via electric resistance in the heating element. Over time this element could develop weak spots that will eventually break causing the coil to quit heating. Gas based furnaces can fail when the ignition system quits working or the gas supply unit fails and either system will no longer work when the blower unit dies.
Furnace installation Chicago involves several choices along the way. For example, you will need to decide whether you need an eighty percent furnace efficiency or a ninety percent one. Surprisingly, this ten percent difference is not so important unless you live in northern states with a lot of snowfall and very cold temperatures. In most well insulated homes eighty percent or better heating units are quite capable of quickly heating a home and keeping that heat level stable.
The next decision will be the exact size of the system. Some homes have inadvertently had oversize and undersized heating units installed, either because the contractor wanted a larger sale or simply had no idea what they were doing. Discussing the new equipment with your Furnace installation Chicago contractor is simply common sense. Along with the heating range, make sure the airflow is strong enough to fill all the spaces in your room. If your home has a heated garage make sure the contractor knows this because large open spaces can affect the overall heating ability of the furnace.
Another important decision when installing a new furnace is the thermostat. Replacing the thermostat with a programmable model is a key move to increasing the efficiency of your heating system. Programmable thermostats give you much more control over your home’s temperature than simply selecting temperature settings. Some new furnaces will come with simple programmable controls so this is an area you will need to discuss with your contractor. Visit Deljo Heating & Cooling, to know more.